What is the wheel surface hardness of MRCSeries?
MRCSeriesWheel surface hardness is 73±5 Shore A.
MRCSeries
Wheel surface hardness ○ ○ ○ ● ○ 73±5 Shore A
Temperature range ○ ● ● ○ ○ -25℃ to +80℃
Smooth scrolling ● ● ● ● ● Excellent
Silent performance ● ● ● ○ ○ Good
Protect the floor ● ● ● ○ ○ Good
Product Introduction
MRCSeriesWheel surface hardness 73±5 Shore A, applicable temperature range -25℃ to +80℃, rolling smoothness: excellent, silent performance: good, floor protection: good, Suitable for a variety of industrial and commercial handling scenarios.
Suitable Equipment
Product Features
Selection Guide
If the Equipment application complies with scenarios such as hard floors and handling of equipment exposed to chemicals, MRCSeries is a suitable choice; the actual Specification can be determined by load capacity, ground and environmental requirements. Contact us to confirm the appropriate Wheel material and size.
Wheel noodles
Nylon is a thermoplastic (PA6) that is impact-resistant, non-marking, non-staining, corrosion-resistant, very friction-resistant, odorless, and resistant to many chemical corrosions, but not resistant to mineral acids, oxidants, chlorine hydrocarbons and heavy metal salt solutions; it has a large load capacity and very small rolling resistance. Nylon can absorb and release moisture, so dimensional fluctuations can be related to the humidity and temperature of the environment.
Nylon applicable temperature range: -25° C to +80° C, higher temperature environments are allowed for short periods of time.
The load-bearing capacity is reduced at ambient temperatures above +35° C. Hardness is 73°±5° Shore D.
feature
• Low operating resistance
• Applicable temperature range: -25° C to +80° C.
• Maintenance-free under normal use.
Specification
medium size
| Product number | Wheel Trail (D)【mm】 |
Wheel width (T2)【mm】 |
load capacity 【kg(lbs)】 |
Bearing inner diameter Ø(d)【mm】 |
Medium width (T1)【mm】 |
Wheel noodles | Bearing |
| 12020704154176 | 4"(100mm) | 1-7/16"(36mm) | 150kg (330lbs) | 10 | 41 | Round | ball bearings |
| 12020705153273 | 5"(125mm) | 1-7/16"(36mm) | 170kg (375lbs) | 10 | 41 |
Heavy duty
| Product number | Wheel Trail (D)【mm】 |
Wheel width (T2)【mm】 |
load capacity 【kg(lbs)】 |
Bearing inner diameter Ø(d)【mm】 |
Medium width (T1)【mm】 |
Wheel noodles | Bearing |
| 12020704151371 | 4"(100mm) | 1-1/4"(32mm) | 50kg (530lbs) | 15 | 32 | Round | ball bearings |
| 12020705152371 | 5"(125mm) | 1-9/16"(40mm) | 300kg (660lbs) | 17 | 40 | ||
| 12020706152371 | 6"(150mm) | 1-9/16"(40mm) | 350kg (770lbs) | 17 | 40 | ||
| 12020708202372 | 8"(200mm) | 2"(50mm) | 400kg (880lbs) | 60 | 50 | ||
| 12020710201371 | 10"(254mm) | 2"(50mm) | 550kg (1210lbs) | 20 | 62 |