⍗Catalog Download

1115EHSeries — Advanced Spring WheelSeries

It is a patented product with shock-absorbing and over-heavy loads. There are many styles to choose from. Using ultra-thick plates and high-grade springs, the quality and workmanship are significantly better than similar products on the market.

Product Introduction

1115-EH Series advanced spring WheelSeries is a patented product with shock absorption and overweight load capabilities. It uses ultra-thick plates and advanced springs. It is a highly specific style among the spring WheelSeries.

Suitable Equipment

  • Equipment for handling overweight loads
  • Highly used factory environment
  • Heavy Industrial Handling Trolley

Product Features

  • Deyi patented shock absorber spring design
  • Overweight load capacity
  • Using ultra-thick plates and high-grade springs, the quality and craftsmanship are superior to similar products on the market
  • High Specification design, Suitable for more severe use conditions

Selection Guide

If the equipment usage conditions are strict and a higher specification shock absorber spring Wheel is required, the 1115-EH advanced spring Wheel Series is a suitable choice; for general standard requirements, the 1115 Series can be considered.

View 1115 Series
1115EHSeries — Advanced Spring WheelSeries

Wheel Options

  • Iron Core NBRRubber Wheel
    Iron Core NBRRubber Wheel
  • QPUWheel
    QPUWheel
  • EQPUWheel
    EQPUWheel
  • VPUWheel
    VPUWheel
  • EPUWheel
    EPUWheel
  • VQPUWheel
    VQPUWheel
  • Iron Core VQPU
    Iron Core VQPU
  • Iron Core XPU
    Iron Core XPU

Top Plate Size And Bolt Hole Spacing

Specification
Size		 Base plate size
Top Plate Size		 Base plate hole distance
Bolt Hole Spacing		 Installation cap size
Attaching Bolt Size
4", 5" 110 x 140mm
(4-5/16" x 5-1/2")		 75 x 110mm
(2-5/8" x 4-5/16")		 12.7mm
(1/2")
4", 5" 130 x 130mm
(5-1/8" x 5-1/8")		 105 x 105mm
(4-1/8" x 4-1/8")		 12.7mm
(1/2")
6", 8" 110 x 145mm
(4-5/16" x 5-11/16")		 75-80 x 105mm
(3-1/8" x 4-1/8")		 12.7mm
(1/2")
12" 160 x 200mm
(6-5/16" x 8")		 120 x 160mm
(4-3/4" x 6-5/16")		 12.7mm
(1/2")

Top Plate Size And Bolt Hole Spacing

Specification
Size		 Base plate size
Top Plate Size		 Base plate hole distance
Bolt Hole Spacing		 Installation cap size
Attaching Bolt Size
4", 5" 110 x 140mm
(4-5/16" x 5-1/2")		 75 x 110mm
(2-5/8" x 4-5/16")		 12.7mm
(1/2")
Specification
Size		 Base plate size
Top Plate Size		 Base plate hole distance
Bolt Hole Spacing		 Installation cap size
Attaching Bolt Size
4", 5" 110 x 140mm
(4-5/16" x 5-1/2")		 75 x 110mm
(2-5/8" x 4-5/16")		 12.7mm
(1/2")
4", 5" 130 x 130mm
(5-1/8" x 5-1/8")		 105 x 105mm
(4-1/8" x 4-1/8")		 12.7mm
(1/2")
6", 8" 110 x 145mm
(4-5/16" x 5-11/16")		 75-80 x 105mm
(3-1/8" x 4-1/8")		 12.7mm
(1/2")
12" 160 x 200mm
(6-5/16" x 8")		 120 x 160mm
(4-3/4" x 6-5/16")		 12.7mm
(1/2")

Specification

Wheel diameter × Wheel width load capacity Material model Bearing total height radius of gyration
fixed Activity brakes
100 x 34mm
(4" x 1-5/16")		 200 kgs (440 lbs) Iron Core XPU (Round)
QPU on Iron Core (Round)		 1115-04-96-1-EH 1115-04-96-2-EH — Ball
Ball Bearing		 194.5mm
(standard type)
(7-5/8")		 Active 95.5mm
Swivel 95.5mm
200 kgs (440 lbs) Iron Core XPU (Flat)
QPU on Iron Core (Flat)		 1115-04-96-1-EH 1115-04-96-2-EH —
200 kgs (440 lbs) QPUWheel (Round)
QPU (Round)		 1115-04-80-1-EH 1115-04-80-2-EH —
200 kgs (440 lbs) QPUWheel (Flat)
QPU (Flat)		 1115-04-80-1-EH 1115-04-80-2-EH —
100 x 37mm
(4" x 1-7/16")		 160 kgs (350 lbs) Iron Core NBRRubber Wheel
NBR Rubber on Cast		 1115-04-04-1-EH 1115-04-04-2-EH — Ball
Ball Bearing		 168.5mm
(Seagull type)
(6-5/8")		 Active 90.5mm
Swivel 90.5mm
125 x 40mm
(5" x 1-9/16")		 200 kgs (440 lbs) Iron Core XPU (Round)
QPU on Iron Core (Round)		 1115-05-96-1-EH 1115-05-96-2-EH — Ball
Ball Bearing		 207mm
(standard type)
(8-1/8")		 Active 108mm
Swivel 108mm
200 kgs (440 lbs) Iron Core XPU (Flat)
QPU on Iron Core (Flat)		 1115-05-96-1-EH 1115-05-96-2-EH —
220 kgs (480 lbs) QPUWheel (Round)
QPU (Round)		 1115-05-80-1-EH 1115-05-80-2-EH —
220 kgs (480 lbs) QPUWheel (Flat)
QPU (Flat)		 1115-05-80-1-EH 1115-05-80-2-EH —
220 kgs (480 lbs) EPUWheel (Round)
EPU (Round)		 1115-05-78-1-EH 1115-05-78-2-EH —
220 kgs (480 lbs) EPUWheel (Flat)
EPU (Flat)		 1115-05-78-1-EH 1115-05-78-2-EH —
220 kgs (480 lbs) EQPUWheel (Round)
EQPU (Round)		 1115-05-81-1-EH 1115-05-81-2-EH —
220 kgs (480 lbs) EQPUWheel (Flat)
EQPU (Flat)		 1115-05-81-1-EH 1115-05-81-2-EH —
180 kgs (400 lbs) Iron Core NBRRubber Wheel
NBR Rubber on Cast		 1115-05-04-1-EH 1115-05-04-2-EH — 181mm
(Seagull type)
(7-1/8")		 Active 103mm
Swivel 103mm
150 x 40mm
(6" x 1-9/16")		 350 kgs (770 lbs) Iron Core NBRRubber Wheel
NBR Rubber on Cast		 1115-06-04-1-EH 1115-06-04-2-EH — Ball
Ball Bearing		 245.5mm
(10")		 Active 178.5mm
Swivel 178.5mm
150 x 42mm
(6" x 1-11/16")		 350 kgs (770 lbs) EPUWheel (Round)
EPU (Round)		 1115-06-78-1-EH 1115-06-78-2-EH — Ball
Ball Bearing		 245.5mm
(10")		 Active 178.5mm
Swivel 178.5mm
350 kgs (770 lbs) EPUWheel (Flat)
EPU (Flat)		 1115-06-78-1-EH 1115-06-78-2-EH —
350 kgs (770 lbs) EQPUWheel (Round)
EQPU (Round)		 1115-06-81-1-EH 1115-06-81-2-EH —
350 kgs (770 lbs) EQPUWheel (Flat)
EQPU (Flat)		 1115-06-81-1-EH 1115-06-81-2-EH —
350 kgs (770 lbs) QPUWheel (Round)
QPU (Round)		 1115-06-80-1-EH 1115-06-80-2-EH —
350 kgs (770 lbs) QPUWheel (Flat)
QPU (Flat)		 1115-06-80-1-EH 1115-06-80-2-EH —
400 kgs (880 lbs) Iron Core XPU (Round)
QPU on Iron Core (Round)		 1115-06-96-1-EH 1115-06-96-2-EH —
400 kgs (880 lbs) Iron Core XPU (Flat)
QPU on Iron Core (Flat)		 1115-06-96-1-EH 1115-06-96-2-EH —
350 kgs (770 lbs) VPUWheel (Round)
VPU (Round)		 1115-06-82-1-EH 1115-06-82-2-EH —
400 kgs (880 lbs) VQPUWheel (Round)
VQPU (Round)		 1115-06-83-1-EH 1115-06-83-2-EH —
400 kgs (880 lbs) Iron Core VQPU (Round)
QPU on Iron Core (Round)		 1115-06-91-1-EH 1115-06-91-2-EH —

Wheel diameter × Wheel width load capacity Material model Bearing total height radius of gyration
fixed Activity brakes
200 x 50mm
(8" x 2")		 500 kgs (1100 lbs) Iron Core XPU (Round)
QPU on Iron Core (Round)		 1115-08-96-1-EH 1115-08-96-2-EH — Ball
Ball Bearing		 279.5mm
(11")		 Activity 203.5mm
Swivel 203.5mm
500 kgs (1100 lbs) Iron Core XPU (Flat)
QPU on Iron Core (Flat)		 1115-08-96-1-EH 1115-08-96-2-EH —
450 kgs (990 lbs) QPUWheel (Round)
QPU (Round)		 1115-08-80-1-EH 1115-08-80-2-EH —
450 kgs (990 lbs) QPUWheel (Flat)
QPU (Flat)		 1115-08-80-1-EH 1115-08-80-2-EH —
450 kgs (990 lbs) EPUWheel (Round)
EPU (Round)		 1115-08-78-1-EH 1115-08-78-2-EH —
450 kgs (990 lbs) EPUWheel (Flat)
EPU (Flat)		 1115-08-78-1-EH 1115-08-78-2-EH —
450 kgs (990 lbs) EQPUWheel (Round)
EQPU (Round)		 1115-08-81-1-EH 1115-08-81-2-EH —
450 kgs (990 lbs) EQPUWheel (Flat)
EQPU (Flat)		 1115-08-81-1-EH 1115-08-81-2-EH —
450 kgs (990 lbs) VPUWheel (Round)
VPU (Round)		 1115-08-82-1-EH 1115-08-82-2-EH —
450 kgs (990 lbs) VQPUWheel (Round)
VQPU (Round)		 1115-08-83-1-EH 1115-08-83-2-EH —
500 kgs (1100 lbs) Iron Core VQPU (Round)
QPU on Iron Core (Round)		 1115-08-91-1-EH 1115-08-91-2-EH —
450 kgs (990 lbs) Iron Core NBRRubber Wheel
NBR Rubber on Cast		 1115-08-04-1-EH 1115-08-04-2-EH —
250 x 80mm
(10" x 3-1/8")		 800 kgs (1760 lbs) VPUWheel (Flat)
VPU (Flat)		 1115-10-82-1-EH 1115-10-82-2-EH — Ball
Ball Bearing		 368.5mm
(14-1/2")		 Active 308mm
Swivel 308mm
800 kgs (1760 lbs) VQPUWheel (Flat)
VQPU (Flat)		 1115-10-83-1-EH 1115-10-83-2-EH —
800 kgs (1760 lbs) Iron Core VXPU (Flat)
QPU on Iron Core (Flat)		 1115-10-91-1-EH 1115-10-91-2-EH —
300 x 90mm
(12" x 3-17/32")		 900 kgs (1980 lbs) VPUWheel (Flat)
VPU (Flat)		 1115-12-82-1-EH 1115-12-82-2-EH — Ball
Ball Bearing		 393.5mm
(15-1/2")		 Activity 333mm
Swivel 333mm
900 kgs (1980 lbs) VPUWheel (Round)
VPU (Round)		 1115-12-82-1-EH 1115-12-82-2-EH —
900 kgs (1980 lbs) VQPUWheel (Flat)
VQPU (Flat)		 1115-12-83-1-EH 1115-12-83-2-EH —
900 kgs (1980 lbs) VQPUWheel (Round)
VQPU (Round)		 1115-12-83-1-EH 1115-12-83-2-EH —
900 kgs (1980 lbs) Iron Core VQPU (Flat)
QPU on Iron Core (Flat)		 1115-12-91-1-EH 1115-12-91-2-EH —
900 kgs (1980 lbs) Iron Core VQPU (Round)
QPU on Iron Core (Round)		 1115-12-91-1-EH 1115-12-91-2-EH —
900 kgs (1980 lbs) Iron Core NBRRubber Wheel
NBR Rubber on Cast		 1115-12-04-1-EH 1115-12-04-2-EH —

Frequently Asked Questions

What is the difference between the premium EH Series and the standard 1115 Series?

EH Series adopts higher specification plate and spring configuration, suitable for more severe use conditions.

What usage scenarios is Suitable for?

Suitable for factories or warehousing and handling environments with overweight loads and high frequency of use.

Is the shock absorbing effect better than the standard model?

The EH premium model is superior to the standard model in terms of shock absorption and durability, and is suitable for scenes that require higher quality.

How to confirm whether I need to upgrade to EH model?

It is recommended to provide Equipment usage frequency and load capacity requirements, and Dexi will assist in evaluating whether a high-end Specification is needed.

Facebook
YouTube
X (Twitter)
1